Hello, welcome to Linqing Feite Bearing Co., Ltd

Linqing Feite Bearing Co., Ltd

Linqing Feite Bearing Co., Ltd
Industry Information
您的位置: 首页 > News > Industry Information
Spherical plain bearing installation should be carried out in a dust-free and clean room

After the bearing is installed, if the alignment is not carefully carried out, the alignment may cause the spherical plain bearing to suffer from additional load, friction and vibration. These may accelerate fatigue and reduce the service life of bearings, and may damage the service life of other machine parts. In addition, increased vibration and friction can greatly increase energy consumption and the risk of premature failure.

1. The spherical plain bearing should be installed in a dust-free and clean room. The bearing should be carefully selected, and the bearing spacer should be ground.

2. The spherical sliding bearing should be cleaned before installation. When cleaning, the inner ring slope is upward, the hand induction is flexible, and there is no sense of stagnation.

3. Special tools should be used for bearing installation, with uniform force and no knocking;

4. Spherical sliding bearings should be stored in clean ventilation, no corrosive gas, relative humidity should not exceed 65%, long-term storage should be regular rust prevention.


0 0
Netizen comments


There is no comment on this content